| 1. | Fracture analysis of bolt in compressed rich gas cooler
压缩富气冷却器螺栓断裂分析 |
| 2. | Capacity expansion and technical reconstruction of rich gas compressor set in coking unit
焦化富气压缩机组扩能改造 |
| 3. | Numerical investigation of kerosene - droplet ' s instable combustion in oxidizer - rich gas
煤油液滴在富氧燃气中不稳定燃烧的数值研究 |
| 4. | The research on near - miscible multi - contact flooding mechanism of injecting associated rich gas
注伴生富化气近混相多级接触驱替机理研究 |
| 5. | Application of z417 / z418 reforming catalysts in the hydrogen production using coking rich gas as the feedstock was described
摘要介绍了z417 / z418型转化催化剂在焦化富气制氢装置中的使用情况。 |
| 6. | The remaining hydrogen - rich gas would be burned in a combined cycle plant to generate power [ see box on preceding page ]
剩馀富含氢的气体，则会在复合式循环设备中燃烧以产生电力（见第81页抽取并封存二氧化碳） 。 |
| 7. | ( 3 ) the general properties the electrical property are evaluated by experiments . its " steplike - voltage is 450mv . it has ideal output - voltage in the rich gas a
（ ）经对生产的氧传感器老化试验结果的分析可知，其耐久性可满足8万公里以内的要求，但老化性能亟待改进。 |
| 8. | Abstract : a new process of reforming light oil to methane - rich gas is described . effects of conditions and parameters concerned on operation results are also discussed . a proposal is made of developing novellreforming catalyst for this new process
文摘:研究了轻油制富甲烷气的工艺过程,讨论了该工艺所涉及的反应条件与各种参数对运转结果的影响,并相应开发出与该工艺相配套的新型转化催化剂。 |
